Bandsaw Blade Feed and Speed Calculator

Convert blade speed — not feed

Convert SFM to m/min or back. This tool does not calculate feed rate or recommend cutting settings. Use the blade and machine makers’ cutting data for your material.

Speed Unit Converter (SFM ↔ m/min)



100 SFM = 30.48 m/min

Find the Manufacturer’s Starting Settings

Check material grade and hardness, workpiece shape and contact length, blade code, TPI and machine compatibility. Use the blade maker’s cutting-data chart; a broad label such as “stainless steel” is not enough.

Starrett: Band Saw Blade Reference Guide (PDF) · WIKUS technical guidance

Feed vs. Speed

Blade speed is band travel in SFM or m/min. Feed is advance into the workpiece, specified separately. Watch chips, vibration, loading and cut quality together; chip colour alone does not validate settings. Follow manufacturer instructions.

Conversion: m/min = SFM × 0.3048; SFM = m/min ÷ 0.3048. For example, 100 SFM = 30.48 m/min. Wheel RPM requires wheel diameter and drive information.

Before Changing Settings

Check clamping, tooth pitch, blade condition, coolant and specified tension. Stop the saw and follow the machine’s safe inspection procedure before accessing blades or guides. Follow the blade maker’s break-in instructions for a new blade.

Blade Options — Check Dimensions and TPI

Affiliate disclosure: As an Amazon Associate, we earn from qualifying purchases at no additional cost to you. Check blade length, width, thickness, TPI and machine fit before purchasing. These listings are examples, not cutting-speed recommendations.

Lenox Classic Pro Bandsaw Blade
Lenox · 5/8 TPI

Lenox 1792737 Classic Pro Vari-Raker Blade

162" × 1" × 0.035" (5-8 TPI). Check the manufacturer’s cutting data for the material and this exact blade.

M42 Bimetal Bandsaw Blades 2 Pack
M42 · 5/8 TPI

2 Pack 93" Bimetal M42 Metal Cutting Blades

93" × 3/4" × 0.035" (5/8 TPI). Check machine fit and the maker’s material-specific speed and feed guidance.

Fine Pitch M42 Bandsaw Blades
Fine Pitch · 10/14 TPI

93" M42 Fine Pitch Metal Blades (10/14 TPI)

93" × 3/4" × 0.035" (10/14 TPI). Fine-pitch option for thin sections; confirm tooth engagement and cutting data.

Compare Blade Listings on eBay

These are marketplace listings, not verified equivalents to the Amazon blades above. Confirm the exact model, dimensions and seller terms.

eBay Listing

M42 Bimetal Band Saw Blade Selection

Verify exact blade length, width, thickness, and tooth pitch on the eBay listing before ordering.

eBay Listing

Industrial Metal Cutting Bandsaw Blades

Check machine compatibility, blade specifications, and seller ratings on eBay Marketplace.

eBay Listing

High-Speed Steel Bimetal Blades Option

Verify current availability, shipping options, and technical dimensions on eBay.

eBay Listing

Variable Pitch Metal Bandsaw Blade

Confirm tooth pitch and material suitability for your band saw application before purchasing.

eBay Listing

Bimetal Metal Cutting Bandsaw Blade Pack

Review full listing details, seller terms, and direct shipping choices on eBay Marketplace.

TPI selection guidance · Bimetal blade guide · Tooth damage troubleshooting

The converter performs arithmetic only; it does not determine safe or suitable cutting settings.